Siemens S7-200 CPU224XP Digital Analog HMI PLC Trainer

Sale!

$2,800.00 $1,400.00

SKU: KM-224XP-DAH Category:

Description

KM-224XP-DAH Siemens S7-200 CPU224XP Digital Analog HMI PLC Trainer

this PLC Trainer can be used for many PLC courses, it’s perfect for Siemens PLC Training,  free-shipping all over the world via DHL.

Most important is, all the compents are mounted and wired, when you receive it, you can directly power on it, don’t worry about wire wrong and destroy it, we all tested before shipping. so you can focus your time on programming, but not wire or mount work.

In fact, the PLC Beginner ofter destroy the PLC due to wrong wire. so it’s worth to purchase a wired  PLC trainer to reduce your time and risk.

When you family with programming with this PLC trainer, you will also know how to deal with real automation projects, it’s similar.

It Contains:

(1)Siemens Original PLC
6ES7214 6ES7 214-2AD23-0XB8 + 6ES7 222-1BF22-0XA8 8DO

SIMATIC S7-200, CPU 224XP COMPACT UNIT,
DC POWER SUPPLY 14 DI DC/10 DO DC,
2 AI, 1 AO 12/16 KB CODE/10 KB DATA,
2 PPI/FREEPORT PORTS

(2)Digital PLC Trainer Contains::
Traffic Lights Digital 12 LED outputs
14 Digital Switch inputs
Proximity Sensor
Photosensor
Three Number Dial Switch inputs
Three Number Digital tube outputs

(3)Analog PLC Trainer Contains::
Analog Input Voltage Meter
Analog Output Voltage Meter
Heater & Heater PWM Drive & PT100 Resistance
Input Switch x2
Output LED Light x2
Power Button
Auto / Manual Switch
Manual Analog output rotary potentiometer

(4)HMI Trainer Contains::
Weinview TK6051IP HMI
Auto/Manual Switch
Run, Stop Button
Emergency Stop button
Download Cable between HMI and PC
Communication cable between HMI and PLC
We can change the HMI ffrom Weinview to other brand which you like, but the price may be raised too, please contact your sales for detail.

(5)PLC trainer install base and AC110-230V to DC24V power supply(rack installed)

(6)Step7 MicroWin Software + Free Digital Control Courses + English Documents download

(7)PLC Multi-Master Station USB Programming Cable For S7-200

Notice:Siemens discontinued S7-200 PLC in some countries, but except China.
Siemens still produce and hot-selling S7-200 CN in China, because it’s cheap and powerfull, so it still be used for many projects and machines.

Nowadays,  although Siemens produce new products S7-1200, but it’s too expensive for some projects, so there are still many automation companies purchase S7-200 CN from China. It’s full new, Siemens original, that’s enough.

About copy or compatible S7-200 PLC made in China, yes there are many too, but it’s not made by Siemens, so the price is very cheap, about the quality, some are fine, some are bad, if you want to reduce the PLC trainer cost, we can also install the compatible S7-200 PLC for you too, we resell these good quality compatible S7-200 PLC for many years too, please contact your sales for detail.

Basic PLC Course:

Digital Trainer
(1)Trotting horse lamp control
(2)Traffic light control
(3)Use Proximity switch sensor to test fan rotary speed(High speed counter)
(4)Use Photoelectric sensor to test fan rotary speed(High speed counter)
(5)BCD code(Binary-Coded Decimal) input from Dial switch
(6)BCD code(Binary-Coded Decimal) output to LED Segment Displays

Analog Trainer
(1)Get Analog Input signal from PT100 thermal resistance.
(2)Use Potentiometer signal to heat the plate.
(3)Use Analog Output signal to heat the plate.
(4)Simple temperature range control.
(5)PID temperature range control.


Leave a Reply

Your email address will not be published. Required fields are marked *