KM-1215-AP Siemens S7-1200 1215C Analog Stepper PLC Trainer
This PLC Trainer can be used for many PLC courses, it’s perfect for S7-1200 PLC Training, free-shipping all over the world via DHL.
Most important is, all the compents are mounted and wired, when you receive it, you can directly power on it, don’t worry about wire wrong and destroy it, we all tested before shipping. so you can focus your time on programming, but not wire or mount work.
In fact, the PLC Beginner ofter destroy the PLC due to wrong wire. so it’s worth to purchase a wired PLC trainer to reduce your time and risk.
When you family with programming with this PLC trainer, you will also know how to deal with real automation projects, it’s similar.
(1)Siemens S7-1200 Original PLC
CPU 1215C 14DI/10DO 2AI 2AO 6ES7 215-1AG40-0XB0
SIMATIC S7-1200, CPU 1215C,
COMPACT CPU, DC/DC/DC, 2
PROFINET PORT, ONBOARD I/O: 14
DI 24V DC; 10 DO 24V DC 0.5A 2
AI 0-10V DC, 2 AO 0-20MA DC,
POWER SUPPLY: DC 20.4 – 28.8 V
DC, PROGRAM/DATA MEMORY: 125 KB
(2)Analog PLC Trainer Contains::
Analog Input Voltage Meter
Analog Output Voltage Meter
Heater & Heater PWM Drive & PT100 Resistance
Input Switch x2
Output LED Light x2
Auto / Manual Switch
Manual Analog output rotary potentiometer
(3)Stepper Trainer Contains:
X,Y two axis stepper controlled sliding rail + Stepper Drive
Limit position Proximity Sensor x4
Position control button x6
Limit position warning LED light x4
(4)PLC trainer install base and AC110-230V to DC24V power supply(rack installed)
(5)DEMO TIA Software + Free Control Courses + English Documents download
(6)PLC communication Cable For PC
Basic PLC Course:
(1)Get Analog Input signal from PT100 thermal resistance.
(2)Use Potentiometer signal to heat the plate.
(3)Use Analog Output signal to heat the plate.
(4)Simple temperature range control.
(5)PID temperature range control.
X.Y two axis Stepper Trainer
(1)Get and test 4 Limit position proximity switch signal.
(2)Automatic Back and Forth movement.
(3)Return to zero position
(4)Two Axis run to certain position.